- 15.10.2020 New Laboratory Catalog
- 23.07.2019 Exhibition GIFA/THERMPROCESS in Dusseldorf
- 19.06.2019 Continuous Furnaces for Heat Treatment under Hydrogen
- 17.04.2019 Change of the Management Board
- 21.01.2019 New Catalog “Additive Manufacturing”
- 06.07.2018 ACHEMA in Frankfurt am Main a Complete Success - New Products Presented
- 03.01.2017 Rotary Tube Furnace for Heat Treatment of Powders and Granules in Hydrogen Atmosphere
- 19.10.2016 Substitution of Aluminum Silicate Wool Products in the Furnace Industry
- 27.07.2016 Heat Treatment in Additive Manufacturing
- 05.11.2015 Successful Exhibition CERAMITEC (Munich); Introduction of New Product Ranges
Continuous Furnaces for Heat Treatment under Hydrogen
Continuous furnaces are the right choice for processes with fixed cycle times, such as preheating, ageing, tempering or annealing. The furnace design depends on the required throughput, the process requirements for the heat treatment, such as the process temperature and atmosphere or the required cycle time.
Continuously operating furnaces are ideal for heat treatment of large numbers of small parts in a protective or reaction gas atmosphere, such as brazing, hardening, or annealing.
Controlled protective gas atmospheres are generated in the furnace by using a gas tight retort. If hydrogen or cracked gas is used for the process, the furnace is equipped with the corresponding safety technology.
Parameters such as maximum working temperature, exposure, and geometry of the charge all play a role in the choice of the conveying system. Established conveyor concepts include metal belts or rollers. Wire and strand annealing furnaces are used to anneal wires or strands; in this case, the charge is unwound in front of the furnace, drawn through the furnace and is then wound again behind the furnace.
To cool the components faster, a water-cooled dual shell is installed directly behind the heating zone; the length of this is determined by the required unloading temperature.